I-Rod® Adhesive™ provides a strong, permanent bond between I-Rod® strips and pipe supports

I-Rod® Adhesive™ is designed to securely anchor strips of I-Rod® in situations where drilling and bolting would be difficult. It’s a great solution for using I-Rod® on solid concrete supports that can’t be fitted with U-bolts, or for locations where drilling through metal is restricted or would require a hot work permit.

I-Rod® Adhesive™ for multiple surfaces
I-Rod® Adhesive™ was selected from over 30 of the best multi-surface adhesives in the industry. For maximum effectiveness, I-Rod® Adhesive™ must be applied under certain conditions: 

Adhesive must be applied evenly to both surfaces being joined for maximum bond strength.

Working time at 77°F (25°C) is around seven minutes; larger quantities and/or higher temperatures will reduce the working time. Obtaining full strength at 22°C requires 72 hours.

Maximum operating temperature for I-Rod® Adhesive™ is 181°F (84°C) and the minimum operating temperature is -166°F (-110°C). (Same temperature range as regular I-Rod® material)